Português 
English 
New Spatium FMM 3D Scanner
The complete optical 3D measurement solution.
A flexible measurement machine (FMM) using high end proprietary technology. Based on white light pattern projection, the 3D Scanner triangulates all points visibles by the two cameras.
Spatium FMM 3D Scanner is the first high end high resolution 3D digitizer to offer a complete optical measurement solution. From surface inspection, edge detection and hole/features measurement to single point tactile probe measurement.
Main Benefits
- Capable to measure millions of point in a few seconds and high accuracy
- Automatic aligment of the acquisitions
- Holes, features, edges and points optical high accuracy measurement
- Optical Tracked Probe for single point measurement
- Integrated Photogrametric System
Results
- Whole part inspection
- 3D Deviations report (As-built x As-designed)
- Section analysis and 2D comparison
- Color deviation maps
- Tooling Development time and Try-out cycle reduction
- Fully automated inspecion and report generation
- Data generation to FEA/CFD software based on digitized parts
- Full interface to all CAD/CAM software
- BEST VALUE
Available variations
Spatium FMM 2MP
2 x 1MPixel cameras. 1 million points / acquisition
Spatium FMM 4MP
2 x 2MPixel cameras. 2 million points / acquisition
Technical Description
| Configuration | FMM 2MP | FMM 4MP |
| Points per acquisition |
1 000 000 | 2 000 000 |
| Acquisition time |
2s | 2s |
| Minimum area |
150 x 150 mm2 |
150 x 110 mm2 |
| Maximum area |
1200 x 1200 mm2 |
1200 x 895 mm2 |
| Distance between points |
0.15 - 1.2 mm |
0.09 - 0.75 mm |
| Acquisition distances |
400 - 2000 mm |
400 - 2000 mm |
| Sensor dimentions |
500 x 300 x 225 mm3 |
500 x 300 x 225mm3 |
| Weight |
8 kg |
8 kg |
| Power supply |
110V/220V AC |
110V/220V AC |
Measurement principle
Spatium FMM 3D Scanner uses structured white light projection to measures part surfaces. Through a pattern projection is possible to triangulate every point visible to the both cameras.
Two high definition industrial cameras are used to acquire the projected pattern. The calculation and measurement are made by Spatium FORMA software that shows the tridimensional coordinates of the points.
Probe Spatium OTP
The Optical Tracked Probe Spatium OTP allows precise measurement of features as holes, edges and hidden surfaces not visible by the projection system. Even with full part coverage and perfect surface measurement some surfaces or features may not be visible to the 3D Scanner and have to be measured by classical CMM's.
Avoiding fixing and alignment of the part, that could be very time-consuming, Spatium have developed an optical tracked probe. Spatium FMM 3D Scanner is capable do track the probe and triangulate its position. The user clicks to acquire point data and the system calculates features like circles, slots, retangles, spheres, cylinders, cones, etc.
Contact us
Contact us for information, demos or quotes. We are available to assist you and provide expertise in products and service.
Copyright 2008, Spatium | Todos os direitos reservados.
